![embeddedprogrammer](/img/default-banner.jpg)
- 28
- 4 144 368
embeddedprogrammer
Приєднався 8 лис 2007
Wind Power , Mechatronics, Robotics, Internet of Things, and more.
Qidi X-Max3 Deep Dive (Part 1 of 5)
I needed an enclosed printer able to print parts at least 1 foot in diameter. The Qidi X-MAX3 looked like it fit the bill so this is my experience starting off with this new high-speed heated-chamber 3d printer.
I will be taking a deep dive into this printer and giving my final review in part 5. Please subscribe to see all of the episodes.
0:06- Unboxing
8:53 - Setup
10:18 - Printing
13:15- Coming Soon..
I will be taking a deep dive into this printer and giving my final review in part 5. Please subscribe to see all of the episodes.
0:06- Unboxing
8:53 - Setup
10:18 - Printing
13:15- Coming Soon..
Переглядів: 1 862
Відео
ESP32 S3 Potted Plant Detection
Переглядів 91Рік тому
I am working on a robot to water my plants. My wife has about 30 potted plants in our back yard. As part of that I am trying to get an embedded camera to recognize the plants and then sample the soil humidity and water them if necessary. I used the following tutorial to set up the neural network code on the camera. www.hackster.io/mjrobot/tinyml-made-easy-image-classification-cb42ae#toc-optiona...
A Tale of Two Rocket Stoves
Переглядів 121Рік тому
Two easy to build rocket stoves. I recently moved to Spain where wood is expensive and I am looking at ways to generate heat more efficiently. These stoves take very little skill to build and have proven quite effective. Video Table of Contents 0:00 Start 1:00 Building Tin Can Stove 2:38 Tin Can Stove Burning 3:18 Building Brick Stove 12:11 Brick Stove Burning
Runaway Rover?
Переглядів 5175 років тому
Trying to build autonomous lawndroid but problems with radio controller, motor drivers, sticky gearbox, and slippery ground are hampering me. I would like to thank MakerMotor.com for helping me resolve the motor driver issue (which may have been my fault). Next week I will release a video of fully autonomous operation of the robot rover and a video outlining our new induction wind turbine picku...
Portable Case for RTK GPS and Raspberry PI
Переглядів 11 тис.5 років тому
Using a Raspberry PI Model 3 B , Ardusimple SimpleRTK2B GPS board, PI camera, and phone backup battery, we construct a portable high precision GPS with centimeter precision, telemetry, and video monitoring capability. This inexpensive box is able to run the gps and Pi for more than 8 hours without charging and has made life a lot easier for testing out this GPS. I plan to add a Pixhawk and use ...
Ardusimple Unboxing and Initial Checkout
Переглядів 23 тис.5 років тому
Ardusimple disrupts the GPS world with the release of the simpleRTK2B Arduino Shield. Delivers accuracy suitable for autonomous robots, mowers, and other machinery. Accurate enough for surveying at a fraction of the price. Ardusimple.com www.kickstarter.com/projects/simplertk2b/simplertk2b-the-first-multiband-rtk-shield-based-o U-blox website (ZED-F9P chip data is here as well as free U-center ...
First Wind Turbine in Garissa, Kenya
Переглядів 22 тис.14 років тому
Wind Turbine setup. First turbine in Garissa Kenya. Off Grid system runs 12v DC lighting and 240V AC wall outlets.
VAWT with new Magnetic Levitation Axle
Переглядів 47 тис.14 років тому
This wind turbine research is a cooperative effort between Berezin Technologies,LLC and Dr. Sanza Kazadi of the Jisan Research Institute ( www.jisan.org ). This is a simple, rugged drag based design modeled after a anemometer. The axle is using a patented technology developed by Dr. Kazadi ( www.google.com/patents/about?id=opaiAAAAEBAJ&dq=sanza kazadi ). PWM Axial Flux generator is being develo...
OEM Wind Turbine Part 3: Grid -Tied Inverters
Переглядів 13 тис.14 років тому
These are the grid tie inverters which come with OEM Wind Power turbines selected with the grid tie option (see OEMWindPower.com for information)
Six Barrel Savonius Vawt
Переглядів 256 тис.14 років тому
Recycled 55 Gallon drums were used to make this six barrel vawt (Vertical Axis Wind Turbine)
OEM Wind Turbine Part 2:Concrete Base
Переглядів 12 тис.14 років тому
How to make a concrete base for a wind turbine.
OEM Wind Turbine Part 1:Assembly
Переглядів 12 тис.14 років тому
Here we put up a wind turbine from start to finish.
Part Three of Energy Monitoring Box
Переглядів 7 тис.14 років тому
Part Three of Energy Monitoring Box
Other uses for Solder Wick Spools -- Recycle!
Переглядів 3,9 тис.14 років тому
Other uses for Solder Wick Spools Recycle!
New Airfoil-Based Wind Turbine Gyro-Mill (vawt)
Переглядів 123 тис.15 років тому
New Airfoil-Based Wind Turbine Gyro-Mill (vawt)
How to Make an Inexpensive Vertical Wind Turbine - Part 2
Переглядів 939 тис.16 років тому
How to Make an Inexpensive Vertical Wind Turbine - Part 2
How to Make an Inexpensive Vertical Wind Turbine - Part 1
Переглядів 2,1 млн16 років тому
How to Make an Inexpensive Vertical Wind Turbine - Part 1
Great work. Thank you for sharing this with us.
I ordered one of these today from Qidi
Fantastic! Outside of the box! Looks 3d printed ;) love love love
That's not a rocket stove. Just a stove with holes in it
Correct
I know exactly where you live
I might go for a V - belt instead of cog wheels. Else nice turbine. May need height to increase output.
OK, 2 months later (11-APR-2024), still only Part 1 of 5. Wondering whether you are still planning more in the series?
packing foam still there...in back there 2 foams
What do you think about this rocket stove innovation with auto fuel feeder? ua-cam.com/video/v_ahLpSiS_o/v-deo.html
Молодец! Я тоже сделал из бочек
Can''t wait to see the next one..
Я тоже сделал из 200л бочек
Yes I like your video.
I don't know why every household doesn't have one of these
15yrs old and actually still works?
is imservice still in business?
No. Sadly Fred Smith passed away unexpectedly.
I hope you will show how many watts this generates in the wind.
I will do that soon. I am making a larger version now and will test it with a motor/generator as well as a a 3d printed generator.
Great stuff. I have 2 videos on windmills may improve yours check it out. There will be a new one very soon that will change the game with windmills 20 times more efficient
thanks. I have subscribed to your channel and am watching your videos now!
Средство от кротов на фазенде.
I don't understand.
Dude, what about those who do not have a machine shop to make gears? Are there patterns that we can get a machine shop to follow?
Yes, email me and I can send you a dxf file.
This is really neat.
How did you make that?
3d printing. It is on thingiverse. I am making a better model myself now in OpenSCAD and will make a video about that soon.
ok,ok volti,volti, volti. CATI AMPERI SCOATE, CA VOLTII NU O SA TI INCARCE BATERIA
no mucho
I just bought a 12x24 imservice that has the mach3 version controller..is urs the deskcnc version?
yes, it uses deskcnc
Дуже цікаве рішення. Вага турбіни біля 20 кілограмів.
Дякую тобі.
Nice turbine..I will try to build this type of turbine but will use pillow block and drive pulley and drive belt for alternator..
Good idea. Let me know how it works and send me a video if you can. Pillow blocks are better long term solutions.
What will it keep electric going to and running
only when the wind is strong.
How much electricity does it put out
between 60 and 200 watts (not much)
How's the ball bearings holding out and how do you protect them from rusting or are they stainless steel
they wore out and I replaced them with pillow blocks
Do you ever sell very old cnc router?,.fyi.imservice went out of business...so no parts available anymore.
I just used it but will sell it if you are interested. Email me.
This a way late comment. I’d separate the system into two then use smaller alternators. 6:1 ratio for bottom and a 7:1 at top. This way if there’s less wind at ground, the upper 3 will continue to generate and ground section will be easier to grab slower winds. Last, everyone else has said it but if you changed the alignment so that each is 121.6 degrees offset, it’d increase torque and overall energy capture.
Thanks. I'll try that.
Nice Jeff! Good to see you do more vids!
Thanks! Nice to hear from you Jim!!
Do you have an inverter? Can you explain some more as to how you are extracting the energy and converting it? I a, very interested in wind I have a small solar set up very small for a greenhouse. I hope you have a blessed day! Wendy🌎🙏🏻🇺🇸
I was using a charge controller to charge a deep cycle battery and a bridge rectifier to go from ac to dc.
@@embeddedprogrammer6276 Thank you! I am learning about solar and wind.
Not inexpensive. How much is the cutting machine?
It's a few grand but you can buy a smaller one for 300 dollars nowadays.
Really great job
Thanks.!
Thats a good idea. I think there is need for noise reduction because honestly if mounted at home there wont be any peace, day and night.
Yes, those bearings are not good for tranquility. I am working on a new design now that uses fabric wings and sealed bearings in Spain.
How many teeth for each gear?
I don't remember. I am going to be releasing the files in May when I return to the US
HERMOSO ENERGIA GRATIS SUUPER
Interesting, I thought about using magnetic bearings to do just that, so what happend to your company, didn't take off ?
Not yet. I moved overseas and now am working on robots and some small wind.
I do dislike lazy lucy bearings., yes., they are cheap., but with the lack of seal.,they are a replacement waiting to happen..Cheap replaced multiple times over are expensive..
You are correct. sealed bearings are better.
बहुत ही अच्छा प्रोजेक्ट बनाया है आपने यह बहुत ही कामयाब वर्टिकल एक्सिस विंड टरबाइन है; किसी शक्तिशाली विंड टरबाइन मैंने अभी तक नहीं देखा
Thank you.
why six barrel?
I ask myself that. Trying to scale...
more surface, more power.
Interesting idea i would probably use a belt driven system and use some recycled bicycle wheels instead of the Lazy Susan ball bearings. Much less noise, more efficient, and can handle weathering much better.
You are correct.
awesome project , thanks
dog is not in this project.but using a belt transmition, make all noise less.
Excellent design !!! Very creative effort
I'd think if you staked the guy wires into the ground, independently of the frame, you'd be surprised how much more stable the axis would be
you are correct
А в 3 лопасти было бы эфективней !
Too much frictional drag from bearings. Go with opposing magnets and carbon fiber half drums for lightweight.
Thanks for the tip
Wheres the load, none, just junk.
Cool, I sell Barrels in Jacksonville Florida if anybody wants to do this particular project and documents it by video let me know I'll sponsor it by giving you six barrels